Process Technology

Wet Process Heating and Cooling Equipment

ELSA & ELTA Series, EasyPlug™ Replacement Single Tube Metal L-shaped Bottom Heaters
316L Stainless Steel and Titanium

WATTS

VOLTS

HORIZONTAL LENGTH
In./(mm)

STANDARD VERTICAL
In./(mm)

316L SS MODEL NUMBER

TITANIUM MODEL NUMBER

SHIP WGT.
Lbs./(kg)

1000

120
240

11 (280)

24 (610)

ELSA1111-R24S-P1
ELSA1211-R24S-P1

ELTA1111-R24S-P1
ELTA1211-R24S-P1

8 (4)

1800

120
240

16 (405)

24 (610)

ELSA1.8116-R24S-P1
ELSA1.8216-R24S-P1

ELTA1.8116-R24S-P1
ELTA1.8216-R24S-P1

11 (5)

2500

240

21 (535)

24 (610)

ELSA2.5221-R24S-P1

ELTA2.5221-R24S-P1

13 (6)

3500

240

27 (605)

24 (610)

ELSA3.5227-R24S-P1

ELTA3.5227-R24S-P1

16 (7.5)

Longer vertical lengths and special configurations available, consult factory.  Single phase only.  10 foot (3m) flexible cord with  EasyPlug™ connector standard, longer lengths available.  CE compliant.

EasyPlug™ systems are easy to install!

  • Mount the control in an appropriate location and plug it in.
  • Mount the heater in the tank and plug it in.
  • That's all there is to it.
  • It's easy with EasyPlug™ heater systems from Process Technology!

Product Features and Benefits:

RUGGED CONSTRUCTION:

• 1 1/4" diameter elements
• 316 stainless steel for fresh water
• Titanium for salt water

MOISTURE RESISTANT HEAD:

• Vapor tight, flame retardant polypropylene terminal enclosure.
• 10 foot (3m) flexible cord standard up to 3,500 watts.
• Wire and conduit provided on 5,000 watt and higher heaters.
• Electrical plug for easy installation with temperature control (EasyPlug™ heater only)

SAFETY FEATURES:

• Grounded construction.
• Thermal over-temperature protector built in.  Replaceable P1 fuse standard.  Protects against low water levels that cause unsafe heater operating conditions.
• Non-floating construction.

CERTIFICATIONS: cUL and CE.

SIZES: 1000-3500 watts.

VOLTAGES:

• 120 volt (1000 watt and 1800 watt only)
• 240 volt

OPTIONS AVAILABLE (consult factory):

• Longer cord (or wire and conduit) lengths.
• Protective guards.
• Mounting clips (standard on EasyPlug™ heaters)
• Longer vertical lengths.
• Resettable thermal protectors (requires additional control components).
• Temperature and level controls sized to match heater.

[ Home | Search our Site | Industrial Products | Aquaculture Products ]
[ High Purity Products | Product Specials | Company Profile ]
[ Trade Shows | What's New | Employment Opportunities ]
[ Troubleshooting Guide | PDF Files | Contact Us ]

Copyright © 2010 Process Technology
info@process-technology.com