Wet Process Heating and Cooling Equipment

NA15E Series, EasyPlug^™ Replacement Non-indicating Single Phase Thermostats
with 5 foot (1.5m) vinyl sleeved sensor

For use with EasyPlug^™ heaters only (order heater separately).

VOLTS	MAX. AMPS	MODEL NUMBER	TEMP. RANGE	SENSOR LENGTH	REPLACEMENT SENSOR P/N	SHIP WGT. Lbs./(kg)
120	15	NA15E-1	32° to 122°F (0° to 50°C)	5' (1525 mm)	NA15-5L	3 (1.5)
240	15	NA15E-2	32° to 122°F (0° to 50°C)	5' (1525 mm)	NA15-5L	3 (1.5)
6 foot (1.8m) flexible power cord and plug included.

EasyPlug^™ systems are easy to install!

Mount the control in an appropriate location and plug it in.

Mount the heater in the tank and plug it in.

That's all there is to it.

It's easy with EasyPlug^™ heater systems from Process Technology!

Product Features and Benefits:

IMPROVES PROCESS CONTROL: Large, easy to read dial.

TEMPERATURE SENSOR: Vinyl covered 5-foot (1.5m) copper bulb and capillary provided standard with the control. Provides extended service in fresh or salt water. Ethylene glycol filled system.

MOISTURE RESISTANT ENCLOSURE: Vapor tight, NEMA 1, IP23, flame retardant gasketed plastic enclosure with stainless steel hardware.

CERTIFICATIONS: cUL.

CAPACITIES:

• Double pole, single throw switches rated at 15-amps for 120 or 240 volts.

• Adjustable temperature range from 32°F (0°C) to 122°F (50°C).

• +/- 5°F accuracy.

• 30°F (-1°C) to 150°F (65°C) ambient temperature range.

• Single phase only.

• 6-foot (1.8m) power cord and plug.

• Plug-in receptacle for the heater.

• Intended for indoor use only.

• EasyPlug^™ replacement temperature controls are intended for use exclusively with EasyPlug^™ heaters.

SAFETY FEATURES:

• Ground connection on thermostat.

OPTIONS AVAILABLE (consult factory):

• Combination controls available for three phase service and larger heater loads.

•	Double pole, single throw switches rated at 15-amps for 120 or 240 volts.
•	Adjustable temperature range from 32°F (0°C) to 122°F (50°C).
•	+/- 5°F accuracy.
•	30°F (-1°C) to 150°F (65°C) ambient temperature range.
•	Single phase only.
•	6-foot (1.8m) power cord and plug.
•	Plug-in receptacle for the heater.
•	Intended for indoor use only.
•	EasyPlug^™ replacement temperature controls are intended for use exclusively with EasyPlug^™ heaters.

Wet Process Heating and Cooling Equipment

NA15E Series, EasyPlug™ Replacement Non-indicating Single Phase Thermostats with 5 foot (1.5m) vinyl sleeved sensor

NA15E Series, EasyPlug^™ Replacement Non-indicating Single Phase Thermostats
with 5 foot (1.5m) vinyl sleeved sensor