Wet Process Heating and Cooling Equipment

SA & TA Series, Single Tube Metal Over the Side Heaters
316L Stainless Steel and Titanium

WATTS	VOLTS	HOT ZONE In./(mm)	LENGTH In./(mm)	316L MODEL NUMBER	TITANIUM MODEL NUMBER	SHIP WGT. Lbs./(kg)
1000	120 240	7 (180)	11 (280)	SA1111-P1 SA1211-P1	TA1111-P1 TA1211-P1	5 (2.5)
1800	120 240	12 (305)	17 (430)	SA1.8117-P1 SA1.8217-P1	TA1.8117-P1 TA1.8217-P1	8 (4)
2500	240	17 (430)	23 (585)	SA2.5223-P1	TA2.5223-P1	10 (4.5)
3500	240	23 (585)	29 (735)	SA3.5229-P1	TA3.5229-P1	13 (6)
5000	240	32 (815)	39 (990)	SA5239-P1	TA5239-P1	16 (7.5)
6000	240	40 (1015)	47 (1195)	SA6247-P1	TA6247-P1	19 (8.5)
Single phase only. 10' (3m) flexible cord standard, longer lengths available. CE compliant.

Product Features and Benefits:

RUGGED CONSTRUCTION:

• 1 1/4" diameter elements

• 316 stainless steel for fresh water

• Titanium for salt water

MOISTURE RESISTANT HEAD:

• Vapor tight, flame retardant polypropylene terminal enclosure.

• 10 foot (3m) flexible cord standard up to 3,500 watts.

• Wire and conduit provided on 5,000 watt and higher heaters.

• Electrical plug for easy installation with temperature control (EasyPlug^TM heater only)

SAFETY FEATURES:

• Grounded construction.

• Thermal over-temperature protector built in. Replaceable P1 protector standard. Protects against low water levels that cause unsafe heater operating conditions.

• Non-floating construction.

CERTIFICATIONS: cUL and CE.

SIZES: 1000-6000 watts.

VOLTAGES:

• 120 volt (1000 watt and 1800 watt only)

• 240 volt

OPTIONS AVAILABLE (consult factory):

• Longer cord (or wire and conduit) lengths.

• Protective guards.

• Mounting clips (standard on EasyPlug^TM heaters)

• Longer vertical lengths.

• Resettable thermal protectors (requires additional control components).

• Temperature and level controls sized to match heater.

•	1 1/4" diameter elements
•	316 stainless steel for fresh water
•	Titanium for salt water

•	Vapor tight, flame retardant polypropylene terminal enclosure.
•	10 foot (3m) flexible cord standard up to 3,500 watts.
•	Wire and conduit provided on 5,000 watt and higher heaters.
•	Electrical plug for easy installation with temperature control (EasyPlug^TM heater only)

•	Grounded construction.
•	Thermal over-temperature protector built in. Replaceable P1 protector standard. Protects against low water levels that cause unsafe heater operating conditions.
•	Non-floating construction.

•	Longer cord (or wire and conduit) lengths.
•	Protective guards.
•	Mounting clips (standard on EasyPlug^TM heaters)
•	Longer vertical lengths.
•	Resettable thermal protectors (requires additional control components).
•	Temperature and level controls sized to match heater.