 |
Wet Process Heating and Cooling Equipment |
|
||
| WATTS | VOLTS |
OVERALL LENGTH In./(mm) |
HOT ZONE In./(mm) |
STEEL | 304 ST. STEEL |
316 ST. STEEL |
TITANIUM | SHIP WGT. Lbs./(kg) |
|---|---|---|---|---|---|---|---|---|
| 500 | 120 240 |
11 (280) |
6 (155) |
DP.5111-** DP.5211-** |
DF.5111-** DF.5211-** |
DS.5111-** DS.5211-** |
DT.5111-** DT.5211-** |
7 (3.5) |
| 1000 | 240 480 |
17 (430) |
10 (255) |
DP1217-** DP1417-** |
DF1217-**
DF1417-** |
DS1217-** DS1417-** |
DT1217
-** DT1417-** |
10 (4.5) |
| 1500 | 240 480 |
23 (585) |
16 (405) |
DP1.5223-** DP1.5423-** |
DF1.5223-** DF1.5423-** |
DS1.5223-** DS1.5423-** |
DT1.5223-** DT1.5423-** |
11 (5) |
| 2000 | 240 480 |
29 (735) |
20 (510) |
DP2229-** DP2429-** |
DF2229-** DF2429-** |
DS2229-** DS2429-** |
DT2229-** DT2429-** |
13 (6) |
| 2500 | 240 480 |
35 (890) |
25 (635) |
DP2.5235-** DP2.5435-** |
DF2.5235-** DF2.5435-** |
DS2.5235-** DS2.5435-** |
DT2.5235-** DT2.5435-** |
15 (7) |
| 3000 | 240 480 |
40 (1015) |
30 (760) |
DP3240-** DP3440-** |
DF3240-** DF3440-** |
DS3240-** DS3440-** |
DT3240-** DT3440-** |
17 (8) |
| 4000 | 240 480 |
47 (1195) |
37 (940) |
DP4247-** DP4447-** |
DF4247-** DF4447-** |
DS4247-** DS4447-** |
DT4247-** DT4447-** |
23 (10.5) |
| 4500 | 240 480 |
54 (1370) |
44 (1120) |
DP4.5254-** DP4.5454-** |
DF4.5254-** DF4.5454-** |
DS4.5254-** DS4.5454-** |
DT4.5254-** DT4.5454-** |
24 (11) |
| 5000 | 240 480 |
59 (1500) |
49 (1245) |
DP5259-** DP5459-** |
DF5259-** DF5459-** |
DS5259-** DS5459-** |
DT5259-** DT5459-** |
25 (11.5) |
| 6000 | 240 480 |
68 (1730) |
58 (1475) |
DP6268-** DP6468-** |
DF6268-** DF6468-** |
DS6268 DS6468 |
DT6268 DT6468 |
28 (13) |
| Three
phase available as option. Add "-3" before thermal protector designator.
**Specify thermal overload protection desired. All heaters must be operated in conjunction
with appropriate temperature and level controls. UL listed, CSA approved, and CE
certified. **Thermal Overload Protection |
||||||||
Product Features and Benefits:
SUPERIOR CHEMICAL RESISTANCE: Materials available for use in most concentrated aqueous alkaline solutions, plating, and phosphate solutions. Check solution recommendation chart or with your chemical supplier for proper sheath material selection.
RUGGED CONSTRUCTION: Heavy wall metal sheaths available in:
• Steel • 304 stainless steel • 316 stainless steel • Titanium OUTSTANDING PERFORMANCE: Low watt densities of 18 watts per square inch (2.8 w/cm2) extend service life.
CORROSION RESISTANT HEAD: Vapor tight, flame retardant polypropylene terminal enclosure with 3-foot (.9m) flexible PVC liquid tight conduit.
SAFETY FEATURES:
• Grounded construction. • Thermal protector built in. Replaceable P1 fuse standard for solutions up to 180°F (82°C). • Non-floating construction. CERTIFICATIONS: UL (except steel sheath), CSA, and CE.
SIZES: 500 watts to 6,000 watts.
VOLTAGES: 120, 240 or 480 volts. 208, 380, 415, 600 and other voltages available. Single phase standard, three phase available.
OPTIONS AVAILABLE (consult factory):
• Replaceable thermal protectors:
• P4: for solutions from 180°F (82°C) to 230°F (110°C).
• P5: for solutions from 230°F (110°C) to 300°F (150°C).• Resettable thermal protectors:
• P2: for solutions up to 180°F (82°C).
• P6: for solutions from 180°F (82°C) to 230°F (110°C).
• P7: for solutions from 230°F (110°C) to 300°F (150°C).
• Special configurations and lengths. • Longer wire and conduit lengths. • Lower watt densities for highly viscous solutions. • Temperature and level controls sized to match the heater.
DOWNLOAD THE INFORMATION SHEET (including dimensional diagram) IN .PDF FORMAT (approximately 100-150KB).
You will need the Adobe Acrobat program to view the information sheet. If you do not have Adobe Acrobat and would like to download it for free, press the button below.
[ Home | Search
our Site | Industrial Products | Aquaculture
Products ]
[ High Purity Products | Product Specials | Company Profile ]
[ Trade Shows | What's New | Employment Opportunities ]
[ Troubleshooting Guide | PDF
Files | Contact Us ]
Copyright © 2010
Process Technology
info@process-technology.com